LR3 (LA) V8-4.4L (2009)
Fog/Driving Lamp: Service and Repair
Front Fog Lamp
Removal
NOTE: Release each clip individually. Clips may fall off if care is not taken.
1. Remove the front fog lamp bezel.
^
Release the 6 clips.
2. Release the front fog lamp.
^
Remove the 3 screws.
3. Remove the front fog lamp.
^
Disconnect the front fog lamp electrical connector.
Installation
1. Connect the front fog lamp electrical connector.
2. Install the front fog lamp.
^
Tighten the screws.
3. Install the front fog lamp bezel.
^
Secure the clips.
4. Check the fog lamp beam alignment.