LR3 (LA) V8-4.4L (2009)
Tail Lamp: Service and Repair
Rear Lamp Assembly
Removal
1. Open the liftgate and tailgate.
CAUTION: Always protect paintwork and glass when removing exterior components.
2. Remove the rear lamp assembly.
^
Remove the 2 screws.
^
Release the 2 clips.
^
Disconnect the electrical connector.
NOTE:
^
Do not disassemble further if the component is removed for access only.
^
Note the fitted position.
3. Remove the wiring harness.
^
Release the wiring harness from the 2 clips.
^
Release the 6 bulb holders.
^
Release the electrical connector.
Installation
1. Install the wiring harness.
^
Install the 6 bulb holders.
^
Install the electrical connector.
^
Secure the wiring harness in the clips.
2. Install the rear lamp assembly.
^
Connect the electrical connector.
^
Secure with the 2 clips.