LR3 (LA) V8-4.4L (2009)
3. Loosen the halfshaft retaining nut.
4. Remove the brake disc.
5. Remove the halfshaft retaining nut.
^
Discard the nut.
6. Using the special tools, release the halfshaft from the wheel hub.
7. Remove the wheel hub.
^
Remove the 4 bolts.
Installation
1. Clean the components.
2. Install the wheel hub.
^
Using the special tools, install the halfshaft in the wheel hub.
^
Tighten the 4 bolts to 115 Nm (85 ft. lbs.).
3. Install a new halfshaft retaining nut and lightly tighten.
4. Install the brake disc.
5. Tighten the new halfshaft retaining nut to 350 Nm (258 ft. lbs.).
^
Stake the nut to the halfshaft.