LR3 (LA) V8-4.4L (2009)
Wiring Harness: Removal and Replacement
Engine Wiring Harness
Engine Wiring Harness - 4.4L
Removal
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
1. Raise and support the vehicle.
2. Remove the engine undershield.
3. Remove the radiator access panel.
^
Remove the 4 bolts.
4. Remove the engine cover.
5. Remove the battery.
6. Remove the engine compartment upper heat shield.
^
Remove the screw.
^
Release the 2 mounting clips.
7. Remove the engine compartment fuse box main feed cable.
^
Remove the bolt.
8. Remove the battery compartment side wall.
^
Release the battery positive cable and grommet.
^
Release the 4 clips.