LR3 (LA) V8-4.4L (2009)
NOTE: Do not disassemble further if the component is removed for access only.
14. Remove the fuel rail.
^
Remove the 4 Torx bolts.
^
Remove and discard the fuel injector O-ring seals.
15. Remove the fuel temperature sensor.
16. Remove the fuel injectors.
^
Remove the retaining clips.
^
Release the fuel injectors.
^
Remove and discard the fuel injector O-ring seals.
Installation
1. Clean the components.
2. Install the fuel injectors to the fuel rail.
^
Install fuel injector O-ring seals.
^
Lubricate the O-ring seals with clean engine oil.
^
Install the fuel injectors.
^
Secure the fuel injector retaining clips.