LR3 (LA) V8-4.4L (2009)
9. Remove the low tire pressure module.
^
Disconnect the 2 electrical connectors.
^
Remove the 2 bolts.
Installation
1. Install the low tire pressure module.
^
Tighten the bolts to 10 Nm (7 ft. lbs.).
^
Connect the electrical connectors.
2. Secure the LH side of the headliner.
^
Carefully secure the clips.
3. Install the LH passenger assist handles.
^
Install the screws.
^
Install the screw covers.
4. Install the sun visor retaining clip.
^
Install the screw.
^
Install the screw cover.
5. Install the LH sun visor.
^
Install the screws.
^
Install the screw covers.
^
Connect the electrical connector.
6. Install the LH C-pillar upper trim panel.
7. Install the LH B-pillar upper trim panel.
8. Install the LH A-pillar upper trim panel.
9. Connect the battery ground cable.