LR3 (LA) V8-4.4L (2009)
/v8-4.4l/Page-1434001.png)
Stabilizer Link: Service and Repair
Front Suspension
Stabilizer Bar Link
Service Repair No - 60.10.02
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. Remove the wheel and tire.
3. CAUTION: Use a wrench on the hexagon provided to prevent the ball joint rotating.
Remove the stabilizer bar link.
^
Remove the 2 nuts.
Installation
1. Install the stabilizer bar link.
^
Tighten the nuts to 115 Nm (85 ft. lbs.).
2. Install the wheel and tire.
