LR3 (LA) V8-4.4L (2009)
4. CAUTION: Mark the position of the driveshaft flange in relation to the drive pinion flange.
CAUTION: To avoid damage to the joint or gaiter, do not allow the driveshaft to hang.
Release the driveshaft from the rear axle drive flange.
^
Remove and discard the 4 Torx bolts.
5. CAUTION: Make sure the weight of the axle is always supported.
Using a suitable jack, lower the front of the axle. N' Remove the axle front retaining bolt.
6. Using the special tools, remove the axle housing bushing.
Installation