LR3 (LA) V8-4394cc 4.4L (2005)
5.
Install the plastic spacer onto the main casting. (Figure 3)
6.
Position the motor under the inboard clip on the main casting. (1 in Figure 4)
7.
Push the motor into position. (2 in Figure 4)
8.
Install the Torx retaining screw and tighten to a maximum torque of 1.2 Nm (10.6 lbf.in).
9.
Refer to GTR Workshop Manual Section 501-09, and install the passenger side door mirror glass.
Disclaimer