LR3 (LA) V8-4394cc 4.4L (2005)
10. Release the LH parking brake cable.
11. Remove the LH parking brake cable.
^
Release the retaining nut.
^
Release and remove the cable.
Installation
1. Install the LH parking brake cable.
^
LH cable: Screw the cable in 5 complete turns.
^
Tighten the retaining nut.
2. Locate and secure the LH parking brake cable.
^
Tighten the bolts to 22 Nm (16 ft. lbs.).
^
Secure the wiring harness.
^
Secure the cable grommet to the integrated body frame bracket.
NOTE: Make sure that the brake cable circlip is positioned as shown.
3. Connect the parking brake cable to the wheel hub.
^
Connect the cable to the brake shoe lever.
^
Locate the cable to the backplate.
^
Tighten the nut to 8 Nm (6 ft. lbs.).
4. Install the LH rear brake disc.
^
Tighten the Torx screw to 35 Nm (26 ft. lbs.).
5. Secure the LH rear brake caliper.
^
Remove and discard the tie strap.
^
Tighten the bolts to 115 Nm (85 ft. lbs.).
NOTE: The adjustment procedure must be carried out in full.
6. Adjust the parking brake shoes.