LR3 (LA) V8-4394cc 4.4L (2005)
/v8-4394cc_4.4l/Page-665003.png)
Install the valve cover.
^
Clean the component mating faces.
5. Install the valve cover retaining bolts.
^
Install valve cover retaining bolts to their position previously noted.
^
Complete the tightening sequence as illustrated.
^
Tighten the bolts to 12 Nm (9 ft. lbs.).
6. Connect the VCT oil solenoid electrical connector.
7. Attach the engine wiring harness to the retaining bracket.
8. With assistance, install the oil level indicator and tube.
^
Clean the component mating faces.
^
Install a new O-ring seal.
^
Lubricate the seal with clean engine oil.
^
Tighten the nut to 6 Nm (4 ft. lbs.).
9. Install the ignition coil-on-plug.
10. Install the remaining ignition coil-on-plugs.
