LR3 (LA) V8-4394cc 4.4L (2005)
Drive Belt Tensioner: Service and Repair
Accessory Drive Belt Tensioner
Accessory Drive Belt Tensioner
Service Repair No - 86.10.06
Removal
1. Disconnect the battery ground cable.
2. Remove the viscous fan assembly.
3. Release the accessory drive belt.
^
Rotate the accessory drive belt tensioner counterclockwise.
4. Remove the accessory drive belt tensioner.
^
Remove the bolt.
Installation
1. To install, reverse the removal procedure.
^
Clean and inspect the drive pulleys for damage.
^
Tighten the tensioner bolt to 40 Nm (30 ft. lbs.).
2. Install the viscous fan assembly.
3. Connect the battery ground cable.