landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Condenser HVAC|Service and Repair|Page 9352 > < Diagram Information and Instructions|Page 9348
Page 1
background image

Condenser HVAC: Service and Repair

Condenser Core

Service Repair No - 82.15.07

Removal

NOTE: The receiver drier need only be changed under the following circumstances: There is dirt in the refrigerant circuit ( eg. compressor seizure ). The
system is leaking and refrigerant has been lost to atmosphere. Refrigerant circuit has been open more than 24 hours due to repair.

1. Disconnect the battery ground cable.
2. Recover the A/C refrigerant.
3. Disconnect the A/C pipes.

^

Remove the 2 bolts.

^

Discard the O-ring seals.

^

Install blanking caps to the exposed ports.

4. Remove the viscous fan drive coupling pulley.
5. Remove the lower fan shroud.

^

Release 2 clips from the cooling fan lower shroud.

^

Release and remove the cooling fan lower shroud from the cooling pack.

6. Remove the radiator securing pegs.

Condenser HVAC|Service and Repair|Page 9352 > < Diagram Information and Instructions|Page 9348