landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Driver/Vehicle Information Display|General|Page 12658 > < Driver/Vehicle Information Display|General|Page 12656
Page 3
background image

^

E = Display shows: Ambient Temperature; Adaptive Cruise Control (if applicable); Text/Information/Advice/Warnings

^

F = Display shows: Ambient Temperature; Warnings/Information

^

G = Display shows: Active Terrain Response(TM) Mode icon; Ambient Temperature; Text/Information/Advice/Warnings

Message Priority

The messages are assigned priorities which are defined by the effect on driving safety and functional ability of the vehicle. New messages are displayed
and accompanied by a chime from the sounder. Messages are divided into three priority groups; 1, 2, and 3 as follows:

Priority Group 1

^

This group of messages have a direct effect on the driving ability and safety of the vehicle, 'ENGINE SYSTEM FAULT' for example. This
message would require an immediate reaction from the driver in response to the message. Priority 1 messages will also be accompanied by the
appropriate warning indicator flashing and a continuous chime from the instrument cluster. If more than one priority 1 message is present, each
message is displayed in turn at 3 second intervals.

Priority Group 2

^

This group of messages do not directly affect the driving ability or safety of the vehicle, 'CHECK BRAKE PADS' for example. This message must
be noted by the driver and the cause rectified as soon as possible. Each of these messages is displayed once at ignition on or when the fault occurs
for a predetermined time period. These messages can be recalled by the driver by pressing the trip reset button for more than 3 seconds.

Priority Group 3

^

This group of messages relate to low priority messages, 'WASHER FLUID LOW' for example. Depending on the message, some messages are
only shown at the end of a journey to avoid annoyance to the driver. The messages will be accompanied by a chime when the ignition is switched
off to alert the driver to their presence.

The messages are displayed in a language applicable to the market configuration of the vehicle and can be changed using T4. The following list shows
the possible messages which can be displayed, other visual or audible warnings and a description of the message.

Driver/Vehicle Information Display|General|Page 12658 > < Driver/Vehicle Information Display|General|Page 12656