LR3 (LA) V8-4394cc 4.4L (2005)
WARNING: Observe due care when working near a hot exhaust system.
Remove the transmission fluid filler/level plug.
^
Remove and discard the sealing washer.
8. Remove the transmission fluid drain plug.
^
Remove and discard the sealing washer.
^
Allow the fluid to drain.
9. Install the transmission fluid drain plug and tighten to 9 Nm (7 ft. lbs.)
^
Install a new sealing washer.
10. Install the transmission support insulator through-bolt and tighten to 175 Nm (129 ft. lbs.).
^
Lower the transmission.
11. Add 3.5 to 4 liters of the correct transmission fluid, or until a small thread of fluid runs from the filler/level hole.
12. Check and top-up the transmission fluid level.
Transmission Fluid Level Check.