landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Campaign - Various Vehicle Systems Upgrades|Page 5239 > < Campaign - Various Vehicle Systems Upgrades|Page 5237
Page 10
background image

Land Rover LR3 (LA)

VIN range specific to each Repair

Range Rover Sport (LS)

VIN range specific to each Repair

*Range Rover (LM)

VIN range specific to each Repair*

CONDITION SUMMARY:
Situation:
 Software enhancements have been introduced during the early production stages of affected vehicles. Installation of these updated software
programs will enhance and stabilize the systems operation of the vehicles. Other areas of the vehicle where problems have been encountered will be
enhanced also at this service opportunity.

Action: You are requested to re-configure affected vehicles using an updated WDS Software Disc 13 with patch file 5 or later. During re-configuration,
it is also necessary that additional actions take place to improve customer satisfaction.

PARTS:
* STC50552................Loctite Thread Locker 242 Fluid (Shop supply)

WARRANTY:

NOTE:  Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance
only. Always refer to DDW to obtain the latest repair time.

Warranty claims should be submitted quoting program code B036 together with the relevant option code from the table 7. This will result in payment of
the stated time and payment for the parts included. As option codes are used, there is no requirement for you to enter SROs; these are repeated here for
information only. The option that allows for the drive in/drive out allowance can only be claimed if the vehicle is brought back into the workshop for this
action alone to be undertaken.

Normal warranty policy and procedures apply.

REPAIR PROCEDURE

CONTROL MODULE TECHNOLOGY UPGRADE PROCESS
LR3 (LA)

VIN 5A000259 to 6A390949

Range Rover Sport (LS)

VIN 6A900109 to 6A956539

Range Rover (LM)

VIN 6A192814 to 6A235003

NOTE:  When updating the transmission control module software, the transmission oil temperature should be within the recommended value
between -55 degree C (-67 degree F) and 80 degree C (176 degree F).

NOTE:  Previous patch file versions should be installed in sequence one at a time before the latest version.

*

CAUTION:  Range Rover (LM) vehicles affected by this action MUST be updated only with IDS DVD104 Patch 2 as the minimum level

Campaign - Various Vehicle Systems Upgrades|Page 5239 > < Campaign - Various Vehicle Systems Upgrades|Page 5237