LR3 (LA) V8-4394cc 4.4L (2005)
Fuel Temperature Sensor: Service and Repair
Fuel Temperature Sensor
Service Repair No - 19.22.08
Removal
1. Secure the hood in the service position.
^
Release the support struts.
2. Disconnect the battery ground cable.
3. Remove the engine cover.
CAUTION: Always plug any open connections to prevent contamination.
4. Remove the fuel temperature sensor.
^
Disconnect the electrical connector.
^
Position an absorbent cloth to collect fluid spillage.
Installation
1. To install, reverse the removal procedure.
^
Clean the component mating faces.
^
Apply sealant to the sensor thread.
^
Tighten the sensor to 7 Nm (5 ft. lbs.).