landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Steering - Tie Rod, Steering Gear Replacement|Page 8369 > < Rear Cross-Member|Service and Repair|Page 8364
Page 1
background image

Front Steering Knuckle: Technical Service Bulletins
Steering - Tie Rod, Steering Gear Replacement

No: LTB00222

Issue: 1

Date: 31 July 2009

SECTION: 211

Steering Gear Tie Rod / Tie Rod End - Diagnostic Procedure and Required Replacement Parts Information

AFFECTED VEHICLE RANGE:
LR3 (LA)

VIN: 5A000360 - 9A508019
Model Year: 2005 - 2009

CONDITION SUMMARY:

Situation: 

On a fix-on-fail basis only, a production update is available allowing the replacement of the original M12 steering outer ball joint with a M14 steering
outer ball joint. When performing this repair, several other components also need to be replaced.

Action: 

Refer to the Parts list, SSM41218 on GTR, and the Diagnostic and Repair Procedures outlined below if steering gear tie rod / tie rod end diagnosis or
component replacement is necessary.

PARTS

TOOLS:

Refer to Workshop Manual (GTR) for any required special tools

WARRANTY:

Steering - Tie Rod, Steering Gear Replacement|Page 8369 > < Rear Cross-Member|Service and Repair|Page 8364