LR3 (LA) V8-4394cc 4.4L (2005)
Shifter A/T: Service and Repair
Selector Lever
Selector Lever
Service Repair No - 44.15.04
Removal
1. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2. If installed, remove the transmission undershield.
^
Remove the 6 bolts.
3. Remove the transmission heat shield.
^
Remove the 4 bolts.
4. Release the selector cable.
^
Using an additional wrench, restrain the clamping bush and loosen the locknut.
^
Compress the latch and release the cable.