LR3 (LA) V8-4394cc 4.4L (2005)
/v8-4394cc_4.4l/Page-1360006.png)
2. Install a new electrical connector sleeve
^
Secure with retainer
3. Connect the electrical connector
4. Secure the oil pan
^
Tighten the Torx screws to 8 Nm (6 ft. lbs.)
5. Install the transmission support crossmember
6. Reconnect the battery ground cable
7. Fill the transmission with fluid
8. Using the Land Rover approved diagnostic equipment, calibrate the control body.