LR3 (LA) V8-4394cc 4.4L (2005)
^
Remove the two retaining bolts.
5. CAUTION: The bolts must only be used once.
Remove the axle carrier.
^
Remove and discard the three bolts retaining the axle carrier to the axle.
^
Remove the axle carrier bushing bolt.
6. NOTE: Take note of the fitted position of the bush.
Using the special tools, remove the axle carrier bushing.
Installation
1. CAUTION: Make sure the bush is correctly aligned.
Using the special tools, install the axle carrier bushing.
2. Install the axle carrier.
^
Tighten the M 14 bolt to 105 Nm (77 ft. lbs.).
^
Tighten the new axle carrier bracket bolts to 80 Nm (59 ft. lbs.), then a further 60 degrees.