LR3 (LA) V8-4394cc 4.4L (2005)
Liftgate Window Glass: Service and Repair
Liftgate Window Glass
Service Repair No - 76.31.22
Removal
CAUTION:
^
Always protect paintwork and glass when removing exterior components.
^
Always protect the interior components when removing body glass.
^
Lay the glass on felt covered supports. Do not stand on edge as this can cause chips which subsequently develop into cracks.
NOTE: The following equipment is required: / Cutting wire and handles / Kent knife / Glazing knife / Glass replacement kit / Sealant applicator gun /
Suction cups / A felt covered table or stand to support glass.
1. Remove the rear wiper arm.
2. Remove the rear wiper drive spindle seal.
3. Remove the liftgate lower trim panel.
4. Remove the liftgate upper trim panel.
^
Release the 4 clips.
5. Remove the liftgate side trim panel.
^
Release the 4 clips.
^
Repeat the above procedure for the other side.