Range Rover P38
LAND ROVER V8
1
REPAIR
CRANKSHAFT PULLEY AND FRONT COVER OIL
SEAL - up to 99MY
Service repair no - 12.21.01 - Crankshaft Pulley
Service repair no - 12.21.14 - Front Cover Oil Seal
Remove
1. Disconnect battery negative lead.
2. Remove cooling fan.
See COOLING SYSTEM,
Repair.
3. Slacken 3 water pump pulley securing bolts.
4. Remove alternator drive belt.
5. Remove water pump pulley bolts. Remove
pulley.
6. Raise vehicle on four post lift.Remove acoustic
cover if applicable.
See CHASSIS AND BODY,
Repair.
7. Secure LRT-12-080 to crankshaft pulley with 4
bolts.
8. Remove crankshaft pulley bolt. Collect pulley
and tool.
9. Using LRT-12-088, remove oil seal from front
cover.
CAUTION: Do not damage front cover.
