Range Rover P38
12
ENGINE
NEW RANGE ROVER
52
REPAIR
5. Progressively remove 4 bolts securing rocker
shaft and remove rocker shaft.
6. Remove push rods.
NOTE: Store push rods in their fitted
order.
7. In the sequence shown remove 10 bolts
securing the cylinder head to block.
8. Remove cylinder head.
9. Remove cylinder head gasket.
Refit
10. Clean mating faces of cylinder block and head
using suitable gasket removal spray and a
plastic scraper, ensure that bolt holes in block
are clean and dry.
CAUTION: Do not use metal scraper or
machined surfaces may be damaged.
11. Check head and block faces for warping and
pitting.
12. Fit cylinder head gasket with the word TOP
uppermost.
NOTE: Gasket must be fitted dry.
13. Carefully fit cylinder head and locate on dowels.
14. Lightly lubricate new cylinder head bolt threads
with clean engine oil.