Range Rover P38
17
EMISSION CONTROL
NEW RANGE ROVER
14
REPAIR
7. Remove 2 nuts securing air injection pipe to air
intake plenum.
8. Position drain tin to collect any coolant spillage.
9. Release clips securing heater hoses to heater.
10. Release hoses from heater.
11. Remove air injection pipe.
Refit
12. Fit air injection pipe to rear of air intake plenum
and tighten nuts.
13. Connect heater hoses to heater and secure with
clips.
14. Connect SAI pump hose to air injection pipe and
secure with clip.
15. Connect LH and RH SAI control valve hoses to
air injection pipe and secure with clips.
16. Remove drain tin.
17. Top up engine coolant.
