Range Rover P38
41
TRANSFER BOX
NEW RANGE ROVER
12
REPAIR
23. Remove 2 bolts securing gear selector cable
abutment bracket and harness support bracket
to gearbox, and position selector cable and
brackets aside.
24. Remove banjo bolt securing breather pipe to
transfer box, remove and discard sealing
washer.
CAUTION: Plug the connections.
25. Disconnect 2 Lucars from transfer box oil
temperature sensor.
26. Disconnect multiplugs from High/Low motor and
output shaft speed sensor.
27. Release harness from 2 clips.
28. Remove bolt securing fuel pipe and purge pipe
retaining bracket to transfer box and release
bracket.
29. Position adaptor plate LRT-99-012 to
transmission lift and secure with nuts and bolts.
30. Raise and adjust transmission lift so that
LRT-99-012 is correctly located to transfer box.
