Remove Clutch Housing - Type C Gearbox
MANUAL GEARBOX
2
OVERHAUL
Clutch housing - Type B gearbox - Remove
NOTE: Early type front cover illustrated.
1. Remove clutch release bearing.
2. Remove bolt securing spring clip to clutch
release lever, remove clip.
3. Remove clutch release lever.
4. Remove ’C’ clip from release lever pivot post,
discard clip.
5. Remove 6 bolts securing clutch housing to
gearbox, remove housing.
NOTE: Dowel located.
Clutch housing - Type C gearbox - Remove
1. Pull clutch release lever off pivot post, remove
lever and clutch release bearing.
NOTE: Early type front cover illustrated.
2. Remove 6 bolts securing clutch housing to
gearbox, remove clutch housing.
NOTE: 2 longest bolts are fitted at dowel
locations and have plain washers under
their heads.