R380 Gearbox Overhaul: Early Type Front Cover - Dismantle
MANUAL GEARBOX
16
OVERHAUL
Front Cover - Remove
NOTE: Early type front cover illustrated.
1. Remove 6 bolts securing front cover to
gearcase, remove cover.
Front Cover - Early Type - Dismantle
NOTE: Early type front cover can be
identified by the lug on each side of the
cover.
1. Remove input shaft bearing track from front
cover. Check that spring clips are intact.
2. Remove and discard oil seal from front cover.
3. Remove layshaft bearing track from front
cover.