R380 Gearbox Overhaul: Gear Change Housing - Type A Gearbox Refit
MANUAL GEARBOX
OVERHAUL
43
Transfer box selector housing - Type A gearbox -
Refit
1. Smear a new gasket with grease and fit to
remote housing.
2. Position transfer box selector housing to
remote housing.
3. Fit and lightly tighten 4 bolts.
NOTE: Bolts are tightened when gear
change housing is fitted.
Gear change housing - Type A gearbox - Refit
1. Smear a new gasket with grease and fit to
remote housing.
2. Position gear change housing to remote
housing ensuring gear lever ball is correctly
located.
3. Fit and lightly tighten 4 bolts.
4. Tighten remote housing, transfer box selector
housing and gear change housing bolts to 25
Nm (18 lbf.ft).
5. Adjust 5th gear stop screw.