Remove Output Shaft and Layshaft - Manual Gearbox Overhaul
MANUAL GEARBOX
OVERHAUL
13
Output shaft and layshaft - Remove
1. Remove slave bolts securing centre plate.
2. Align selector shaft pin with slot in centre plate
and using wooden blocks and hide mallet,
drive off centre plate; collect lower detent ball
and spring.
3. Remove bearing tracks and shims from centre
plate.
4. Remove layshaft, output shaft and selector
shaft from casing as an assembly.
5. Remove input shaft, and 4th gear baulk ring. (If
not already removed with output shaft).
