Range Rover (LH) V8-3.5L (1987)
2.
Carefully tip the seat backward in the vehicle to gain access to the fore/aft mounting bolts (Figure 1).
CAUTION:
A maximum of 2 mm (0.080 in.) of material may be removed from the spacer. Removing more than 2 mm may cause damage or binding in the
mechanism.
3.
Perform the following modification to each mounting bolt spacer:
^
Remove one side fore/aft mounting bolt and spacer (Figure 2).
^
Mark the spacer to identify the maximum amount of material to be removed.
^
Grind or file 2 mm from the neck of the spacer as shown in Figure 3.
^
Install modified fore/aft mounting spacer and bolt.
^
Go to step 3 and perform the same procedure on the unmodified side fore/aft mounting bolt spacer.
4.
Position seat and install using removed bolts.
5.
Confirm that seat movement is smooth and that the repair has reduced or eliminated seat rock symptoms.