Range Rover (LH) V8-3.5L (1987)
/v8-3.5l/Page-909002.png)
6. Refit the lower dash panel.
7. Fit the master cylinder to the servo, refit the plain and spring washers and secure the master cylinder to the servo with the two nuts. Tighten the
nuts to 21-29 Nm (15-22 ft lb).
8. Remove the sealing plugs, fitted to the master cylinder outlet ports during the removal procedure and refit the brake pipes to their respective ports.
Tighten the brake pipes to 9-11 Nm (7-8 ft lb).
9. Refit the vacuum supply hose.
10. Fill the master cylinder to between the MAX and MIN level markings with the correct grade of brake fluid.
11. Bleed the brake systems.
