Range Rover (LH) V8-3.5L (1987)
Oil Cooler: Service and Repair
Oil Cooler Adapter - Engine Numbers Without Suffix B
Oil cooler adapter - remove
1. Remove oil filter element.
2. Mark position of adapter in relation to oil pump cover.
3. Remove centre screw and withdraw adapter.
4. Remove and discard sealing ring.
Oil cooler adapter - refit
1. Thoroughly clean adapter.
2. Position new sealing ring, fit adapter, ensuring marks previously made line up, fit and tighten centre screw.
3. Lubricate sealing ring of oil filter with engine oil.
4. Screw filter on to filter head until it seats then tighten a further half-turn.