Range Rover (LH) V8-3.5L (1987)
7. Release the hose clamps and remove the flexible hoses, withdraw the reservoir from the engine compartment.
NOTE: If the reservoir is not to be refitted immediately, the hoses must be sealed to prevent the ingress of foreign matter.
REFIT
1. Reconnect the flexible hoses to the reservoir. Tighten the hose clamps securely.
2. Refit the reservoir to the bracket and tighten the pinch bolt securely.
3. Fill the reservoir to the prescribed level on the dipstick with one of the recommended fluids and bleed the power steering system.
4. Fit the reservoir filler cap.
5. Close the hood.