Range Rover (LH) V8-3.5L (1987)
Wheel Fastener: Service and Repair
Wheel Stud
Service Repair No - N/A
1. Remove wheel.
2. Drive stud (2,3) out of driveshaft flange.
3. Position stud (2,3) in flange.
4. Install a suitable spacer (4) over stud.
5. Using a M16 x 1.5 nut (5), a slave wheel nut is suitable, pull stud into flange until shoulder of stud abuts flange.
6. Install wheel.