Range Rover (LH) V8-3.5L (1987)
/v8-3.5l/Page-823001.png)
Drive/Propeller Shaft: Service and Repair
Routine Maintenance
LUBRICATE FRONT AND REAR DRIVE SHAFT UNIVERSAL AND SLIDING JOINTS
1. Clean all the grease nipples on the front and rear drive shafts.
Grease Fitting
Grease Fitting
2. Charge a low pressure hand-grease gun with grease of a recommended make and grade and apply to the grease nipples at the front and rear drive
shaft universal and sliding joints.
