Range Rover (LH) V8-3.9L (1989)
Heater Core: Service and Repair
REMOVE
1. Remove the heater unit.
Fasteners
2. Remove the fasteners from the cam bracket for the fresh air flap, and move the cam and bracket assembly aside.
3. Remove the lock-washers from the four flap shafts.
4. Remove all the drive screws from the left hand side cover.
5. Withdraw the left hand side cover complete with the fresh air flap.
6. Withdraw the heater core complete with seals.
7. Withdraw the seals from the heater core.
REFIT
1. Apply Bostik sealing compound around the flange of the left hand side cover.
2. Reverse 1 to 7.