Range Rover (LH) V8-3.9L (1989)
Oil Level Sensor: Service and Repair
Low Oil Level Sensor Unit
Low Oil Level Sensor Unit
NOTE: Ensure that the oil level is below the sensor before removal.
REMOVE
1. Disconnect the battery negative lead.
Low Oil Level Sensor Unit
2. Disconnect the wiring connector.
3. Remove the brass securing nut.
4. Withdraw the sensor unit.
REFIT
1. Fit a new sealing washer.
2. Reverse the removal procedure.
3. Top up the engine oil level. Run the engine and check for leaks around the sensor unit.