Range Rover (LH) V8-3.9L (1989)
Cigarette Lighter: Service and Repair
Front
REMOVE
1. Disconnect the battery negative lead.
2. Remove the High/Low range gear knob.
3. Remove the main gearbox knob. See Automatic gear selector panel illumination.
4. Remove the glove box liner and release the parking brake cable from the parking brake lever, pry the inset panel out of the floor mounted console.
Pull the two illumination bulbs from the selector panel.
5. Release the glove box from its four floor mounted fasteners.
6. Raise the front of the glove box and console assembly and ease the unit away from the radio housing.
Radio
7. Remove the radio, referring to the manufacturer's instructions for removal and installation.
8. Remove the single screw securing the housing to the top of the gearbox tunnel.
Cigarette Lighter
9. Pull the housing away from the lower dash panel.
10. Disconnect the electrical leads at the rear of the cigar lighter.
11. Remove the push-in switch from the lighter outer body.
12. Depress the outer plastic surround where denoted by the arrows and push the outer body through the surround.
13. Maneuver the plastic surround and remove it from the radio housing.
Lighter Illumination Bulb Replacement
Cigarette Lighter Illumination