Range Rover (LH) V8-3.9L (1989)
Brake Light Switch: Technical Service Bulletins
Brake Lamp Switch - Replacement Guidelines
Bulletin # P88-014
Section: Product
Dated: 09/30/88
Subject:
BRAKE LAMP SWITCH REPLACEMENT
To: ALL RANGE ROVER DEALERS
When replacing or adjusting the brake lamp switch, please note the following:
-
Do not twist the switch housing to tighten or loosen. Since the switch stem is keyed into the bracket, twisting can break the switch.
-
Tighten the shoulder nut only enough to limit switch movement.
-
Test switch operation with the engine running. The brake lamps should operate with light pedal pressure.