Range Rover (LH) V8-3.9L (1989)
Steering Column Cover: Service and Repair
STEERING COLUMN SHROUD
Certain operations within the electrical section necessitate removal of the steering column shroud. Unless removal of both sides of the shroud is required,
remove ONLY the side necessary for access.
REMOVE
1. Disconnect the battery negative lead.
2. Remove the lower dash panel.
3. Disconnect the electrical connections to either the master lighting switch or the rear screen wash wipe switch. (Disconnect both if removing the
complete shroud).
Steering Column Cover
4. Left hand shroud-remove three securing screws and remove the shroud over the indicator/high beam switch.
5. Right hand shroud-remove three securing screws and remove the shroud over the windscreen wash wipe switch.
6. To facilitate reassembly remove the screw securing the two halves of the shroud together from one side only.
REFIT
1. If both sides of the shroud have been removed ensure that the plate on the steering column is correctly located in the slot in the shroud.
2. Reverse the removal procedure.