Range Rover (LH) V8-3.9L (1989)
Radius Arm Bushing: Service and Repair
Front
CAUTION: When pressing in the new bushings, ensure that pressure is applied to the outer edge of the bushing only and not to the rubber inner.
Radius Arm Fasteners
REMOVE
-
Using a suitable hydraulic or bench press and a piece of metal tubing slightly smaller than the outside diameter of the bushing, press out the rubber
mounted bushings. Ensure the steel tubing locates on the outer edge of the bushing and not on the rubber inner.
REFIT
-
Fit the replacement bushings centrally in the arm.