Range Rover (LM) V8-4.2L SC (2006)
WARRANTY
REPAIR PROCEDURE:
REPLACE WINDOW REGULATOR
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home > NAS > LM - New Range Rover > Service Information > Model Year > Workshop Manual - Service Procedures > 76-1 - Doors
1.
Refer to Workshop Manual (GTR) Section Glass Regulator - Rear Door (76.31.46) to replace the affected window regulator.
CONFIGURE THE BODY CONTROL MODULE (BCU)
CAUTION:
A Midtronics PSC-550 Vehicle Power Supply must be connected to the vehicle battery during diagnosis / module programming.
1.
Connect the Midtronics PSC-550 Vehicle Power Supply to the vehicle battery.
NOTE:
IDS must be loaded with T4 disk 21 or later.
2.
Connect the IDS to the vehicle.
3.
Select 'T4 Diagnostic System'.
4.
Select 'Range Rover' icon.
5.
Select 'Diagnostic System'.
6.
Follow on-screen instructions to enter Model Year and VIN.
7.
Select 'System Diagnostics'.
8.
Select 'Windows and Sunroof'.
9.
Select 'Fault Code Diagnostics'.
10.
Follow instructions and clear all Diagnostic Trouble Codes (DTC's).
11.
Select 'Vehicle Maintenance'.
CAUTION:
Do not disconnect battery and renew ECU as per IDS prompts.
12.
Select 'ECU Renewal'.