Range Rover (LM) V8-4.2L SC (2006)
2.
Inspect vehicle for bloom or a milky type of stain. (Figure 1)
3.
Subject the vehicle to a 30 minute bake cycle at 60°C (140°F) in a conventional spray booth/oven.
CAUTION:
When using an infra red curing unit, appropriate actions must be taken to protect plastic components from heat damage.
4.
If a spray booth/oven is not available, apply localized heat from an infra-red curing unit.
5.
When the vehicle or sheet metal is cool, polish the affected area.
Disclaimer