Range Rover (LM) V8-4.2L SC (2006)
5. Remove the coolant expansion tank.
^
Remove the 2 bolts.
^
Release from the clip.
NOTE: Do not disassemble further if the component is removed for access only.
6. Remove the coolant low level sensor.
Installation
1. Install the coolant low level sensor.
2. Install the coolant expansion tank.
^
Secure with the clip.
^
Tighten the bolts to 10 Nm (7 ft. lbs).
3. Connect the coolant low level sensor electrical connector.
4. Connect the expansion tank coolant hoses.
^
Secure with the clips.
^
Remove the hose clamps.
5. Top-up the coolant.
^
Install the coolant expansion tank cap.