landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Lighting - Condensation in Tail Lamp Assemblies|Page 9040 > < Lighting - Condensation in Tail Lamp Assemblies
Page 2
background image

^

When normal condensation occurs, a thin film of mist can form on the inside surface of the plastic lens. The thin mist will clear and exit
through the vents during normal lamp operation.

1.

If condensation is reported, determine if it dissipates during a 30-minute period of normal tail and fog lamp operation as the lamp heats up.

2.

If considerable water droplets remain at unacceptable levels on the inside of the lamp lens at the end of 30 minutes (Figures 1-4), replace the lamp
with the latest configuration.

3.

If there is evidence of standing water within the lamp unit, replace the lamp with the latest configuration.

NOTE:

GTR lookup sequence is as follows:

Lighting - Condensation in Tail Lamp Assemblies|Page 9040 > < Lighting - Condensation in Tail Lamp Assemblies