Range Rover (LM) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-527001.png)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Tire Pressure Monitoring System Receiver
Tire Pressure Monitoring System Receiver
Removal
1. Release the front overhead console.
Open the spectacle holder.
Remove the 2 screws.
Release the 6 clips.
2. Remove the tire pressure monitoring receiver.
Disconnect the electrical connector.
Installation
1. Install the tire pressure monitoring receiver.
Connect the electrical connector.
2. Secure the overhead console.
Secure the 6 clips.
Install the screws.
Close the spectacle holder.
