Range Rover (LM) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-19001.png)
General Module: Service and Repair
Generic Electronic Module (GEM)
Removal
1. Move the passenger seat cushion fully rearwards.
2. Remove the Generic Electronic Module (GEM) access panel.
^
Release the 2 clips.
3. Move the passenger seat cushion fully forwards.
4. Disconnect the battery ground cable.
5. Remove the GEM.
^
Disconnect the 3 electrical connectors.
Installation
1. Install the GEM.
^
Connect the electrical connectors.
2. Connect the battery ground cable.
3. Move the passenger seat cushion fully rearwards.
4. Install the GEM access panel.
^
Install the clips.
