Range Rover (LM) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-24001.png)
Voice Activation Module: Service and Repair
Multifunction Voice Activated Module
Removal
1. Remove the access panel from the loadspace trim panel LH.
2. Release the multifunction voice activated module.
^
Remove the 2 nuts.
3. Remove the multifunction voice activated module.
^
Disconnect the electrical connector.
Installation
1. Install the multifunction voice activated module.
^
Connect the electrical connector.
2. Secure the multifunction voice activated module.
^
Tighten the bolts to 6 Nm (4 ft. lbs.).
3. Install the access panel to the loadspace trim panel LH.
