Range Rover (LM) V8-4.2L SC (2006)
/v8-4.2l_sc/Page-378001.png)
Fuel Temperature Sensor: Service and Repair
Fuel Temperature Sensor
Service Repair No - 19.22.08
Removal
1. Disconnect the battery ground cable.
2. Remove the air intake resonator.
3. Position the wiring harness aside.
^
Remove the 2 bolts.
4. Remove the throttle body intake.
^
Disconnect the breather line.
^
Release the clip.
^
Release the bushing.
CAUTION: Before disconnecting or removing the components, ensure the area around the joint faces and connections are clean. Plug
open connections to prevent contamination.
5. Disconnect the intake air temperature (IAT) sensor electrical connector.
6. Remove the fuel temperature sensor.
^
Disconnect the electrical connector.
WARNING: The spilling of fuel is unavoidable during this operation. Ensure that all necessary precautions are taken to prevent fire and
explosion.
CAUTION: To prevent damage to components, use an additional wrench when loosening or tightening unions.
